Unix Configuration Notes; Drive Requirements; Drive Configuration Switches - Seagate DDS Installation Manual

Seagate DAT Drive Installation Manual—English

UNIX Configuration Notes

This section describes how to configure the Scorpion 4, 8 and
24 Drives to operate on various UNIX systems. It gives
details of Drive configuration options, and also any changes
that may be required at the operating system level. When
configured as documented in this guide, the Drive will
perform as an integrated component of the system, giving
maximum functionality.

Drive Requirements

In order to enable the UNIX compatible functions within the
Drive, the following hardware requirements apply:
Drive
Scorpion-4
Scorpion-8
Scorpion-24

Drive Configuration Switches.

The UNIX Compatible Drives have a set of configuration
switches on the bottom of the Drive. Switches 9 and 10 are
used for UNIX support:
System
Sun
DEC
IBM
HP
SGI
SCO
Non-UNIX
Model # Hardware
STD24000N-SB 10-position dip switch
STD28000N-SB 10-position dip switch
STD224000N-SB 10-position dip switch
Switch 9 Switch 10
off on
on off
off on
off off
off off
off off
off off
A-27