Brother Pacesetter BES Lettering Instruction Manual page 69

Resetting the Frame
The Reset Frame command is useful when you have altered
your text object a bit too much and want to start over.
Resetting Individual Letters
If you are have selected a single letter in a text segment, the
context menu will have an additional option, the Reset Letter
command. Use this command in cases where you have
manipulated a letter and want to reset it so that it looks as it
would if it was never individually adjusted.
This command is available when you activate individual letter
size handles and right-click the individual letter with your cursor.
Changing Text Direction
The text direction setting is applicable only to text segments in
the Circle frame.
Initially, when you create a Circle text segment, the letters will
start at the top, and read clockwise around the circle (this is
'Text Direction Normal'). However, if you want the text to start at
the bottom and read counter-clockwise instead, you can change
to this condition by right-clicking the segment and choosing Text
Direction Reverse from the menu that appears.
To get text that goes in both directions, within a single Circle
text segment, type text directly into the Circle text properties
page: 'Normal' direction into the Upper text box, and 'Reverse'
text into the Lower text box.
If you have text in both the upper and lower text fields,
changing the text direction will swap the positions of the two
text strings, so you will not have to re-enter them manually.
Text Properties 67