Displaying Special Characters - Brother Pacesetter BES Lettering Instruction Manual

3 In the Pull Compensation Area of the Properties panel, click
the down arrow to the right of the Type field.
4 A list of options is displayed.
5 Select one of the following options:
None. Makes no adjustments to pull compensation.
Percentage. Enter the percentage in the Value % box
and, if necessary, enter the maximum value of pull-
compensation in the Max Range box.
You can also adjust the value % number using the value %
slider.
Absolute. Enter the amount of absolute pull-
compensation (in mm) in the Absolute Value box.
6 Click Apply.

Displaying Special Characters

When you create lettering, you can enter characters available
on your keyboard. You can also enter characters using ASCII
numbers, a feature that is available for you to use if needed. An
ASCII number is a code number, four digits long, which
represents a character that does not have a key to represent it.
For instance, ™ or ® are symbols that exist in some fonts but
are not type-able on a standard US/English keyboard.
Due to Windows constraints, you must enter the numbers on
the keyboard's numeric keypad for this to work.
Please note that not all fonts contain all of the special
characters. To see which characters are available in any given
font, check the font preview information for that font.
You can see the list of available characters for a font by
pressing on the
Properties panel, or by hovering your mouse over the font
preview.
button in the Font field of the Text
Text Properties 81