Adjusting The View Of Your Workspace; Magnifying And Reducing The View - Brother Pacesetter BES Lettering Instruction Manual

Adjusting the View of your
Workspace

Magnifying and Reducing the View

Use Zoom to magnify or reduce parts of your design. With Zoom
you can either left-click to enlarge your design or right-click to
make your design smaller.
You can zoom in and out of your workspace by using the Zoom
tool. This tool turns Zoom Mode on and off.
When you turn Zoom Mode on, you will see your cursor change.
With this cursor you can perform three actions:
• Left-Click: This zooms the display in, using the point you
clicked on as the center for the display.
• Right-Click: This zooms the display out, using the point you
clicked on as the center for the display.
• Left-Drag: If you drag a box on the screen, the display will
zoom to fit that box.
To use the Zoom Tool:
1 On the Ribbon, select the Home tab.
2 In the Zoom toolbar, click on the Zoom
The pointer becomes a magnifying glass.
3 Do either of the following:
Right-click to make your design larger.
Left-click that area to make your design smaller.
To zoom-in on a specific area:
1 On the Ribbon, select the Home tab.
2 In the Zoom toolbar, click on the Zoom
The pointer becomes a magnifying glass.
3 Click and hold your mouse button and drag it to form a
flexible box around the area you want to see in detail.
Learning about the Workspace
tool.
tool.
23