96
Pacesetter BES Lettering
Instruction Manual
Moving Parts of a Design Manually
You can move the component parts of your design relative to
each other by dragging them to another location.
To move a design component manually:
1 From the Home tab, click the Select
2 Click and drag the design component to its new location.
As you drag, the status line displays the horizontal (dx) and
vertical (dy) distance.
Nudging Design Components
Nudging moves the selected design component or group of
design components. Nudging is similar to dragging the design
component but the distance that the design component moves
is smaller.
To nudge up:
•
Use Ctrl +
To nudge down:
•
Use Ctrl +
Align Bottom: Aligns all selected objects to the bottom-most
item selected.
Vertical Center: Takes all selected objects and centers them
in the selection box. The objects are moved so that they are
centered top-to-bottom with each other, but they are not
moved left or right.
Horizontal Center: Takes all selected objects and centers
them in the selection box. The objects are moved so that
they are centered left-to-right with each other, but they are
not moved up or down.
Center: Centers one or more selected objects proportionally
in the design workspace.
.
.
tool.