Fill Density Setting - Brother Pacesetter BES Lettering Instruction Manual

Hide thumbs Also See for Pacesetter BES Lettering:
Table of Contents

Advertisement

5 From the Pattern list, select a pattern.
6 Click Apply.
The fill of your text segment is altered accordingly.

Fill Density Setting

Fill density is the distance between individual lines of
embroidery. Density is measured in millimeters.
How does changing this setting affect your design? If you have
a very loosely woven fabric, you may want to use a slightly
larger number, which will decrease the density. This is done
because the fabric may not be able to hold a large set of
stitches in a small area.
It is important to always stitch a test before committing to a
design.
If you are unsure what setting to use, try the standard setting of
0.4. This setting works well almost universally, as long as you
have not exceeded the font's size recommendations.
In the Fill area, the image beneath the Density setting will
change as you adjust the setting. These are not precise images;
rather, they are intended to provide you with visual cues to what
you are doing as you change the settings.
Text Properties
75

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bes lettering

Table of Contents