Viewing Different Parts Of The Workspace (Panning) - Brother Pacesetter BES Lettering Instruction Manual

Viewing Different Parts of the
Workspace (Panning)
Sometimes you may want to work at a high level of
magnification, and some part of the garment or embroidery
you're working on will not show up in the workspace.You can
move to parts of your design that go beyond the window's
borders. In these situations, you can use keyboard arrows or
the pan tool to change your view of the project.
Panning using the keyboard:
• Use the
• Use the
• Use the
• Use the
Using the Pan Tool
The Pan tool turns your cursor into an icon of an open
hand. This allows you to drag the window around, while, at the
same time, being able to see where you are moving. This is
similar to moving around the window using the scrollbars.
You access the Pan tool from the Zoom Toolbar on the Home
tab of the Ribbon.
The Pan tool does not move any design objects, only the area
of the overall design that is being displayed.
If the Pan tool is selected, you can right-click and the last-
selected tool will be selected. Doing so will also deselect the
Pan tool.
key to move up.
key to move down.
key to move left.
key to move right.
Learning about the Workspace 25