Table of Contents
Advertisement
•
Select the Screen Pop check box to have AltiConsole pop up when a
call comes in to your extension.
•
Select the Audio Beep check box to hear a beep when a call comes in
to your extension.
•
For overhead paging, select whether to send the output to an audio
output (the same as pressing #44 on the phone pad) or to a trunk line
(#45). If you select a trunk line, use the drop down list to select the
trunk to be used for the overhead paging.
Note: Check with your system administrator about the correct
settings for overhead paging options in AltiConsole.
•
Select the Auto Attendant number to be used as the default to which
callers are sent when you transfer a call to the Auto Attendant.
You can transfer individual calls to Auto Attendants other than this
default, as described in "Transfer to Auto Attendant" on page 20.
Viewing Your Server, Extension, and Tenant ID
Click the Logon Info tab to view the server, extension, and tenant ID you
are using.
The server and extension are those entered in the AltiConsole logon dialog
box for this session. The tenant ID of your extension is set by your system
administrator.
AltiConsole 4.5 Manual
26
Advertisement
Table of Contents
