Table of Contents
Advertisement
answer with the AutoAttendant. You will need to activate your IP extension as described in
section 2.1.
Leave the other configuration parameters of the Internet Switchboard as default values. One
parameter you may have to change is the compression codec to be used – by default, you should
go with G.723.1 with 30ms jitter buffer setting, but for some reason if you are not getting a good
quality voice connection, you can experiment with different jitter buffer settings or with G.711
codec.
The other parameter that may require tweaking in some installations is echo cancellation setting.
You can adjust the echo cancellation settings from the Internet Switchboard software's GUI.
4.2.1.3. Ordering Information
All Quicknet products can be ordered on the Internet. You can order them from:
http://www2.warehouse.com/search/pppsmainsearch.asp?qu=%40mfr%5Fname+Quicknet
The items of relevance for AltiGen customers are listed below:
INTERNET PHONECARD PC CARD
DMD4720
F/PHONE OVER INTERNET
SMARTCABLE CONNECTION
EX10647
F/INTERNET PHONECARD
Internet Phonejack-PCI Phone Over
EX10648
Internet
4.2.2. Siemens
AltiGen is testing Siemens LP5100 phone for use as an IP extension with the AltiServ system.
LP5100 is a standalone, Ethernet (10 Base T) based, standard H.323 phone. The main advantage
with the Siemens phone is that it does not require a PC to function.
4.2.2.1. Configuration
Phone basics
The LP5100 has several configuration options and they are accessible via a web browser or from
the phone itself. Before you start configuring the phone, you need to familiarize yourself with the
phone and the various navigation buttons on the phone.
In addition to the standard number keys, * and #, the LP5100 has a few other keys:
•
16 programmable buttons that can be used for speed dials or control functions such as
Flash. They are found on both sides of the number keys.
-
+
•
and
buttons to control the volume when you are on a call.
•
Four navigation buttons that help you navigate through the configuration options:
o ⊗ button (leftmost) acts like a Cancel button in a GUI
o ← button (second from left) takes you back one step in a menu or acts like a
backspace key while entering data
o → button (third from left) takes you forward one step in a menu
o √ button (rightmost button) acts like the OK button in a GUI and helps you select
an option.
To get into the configuration mode, press the → button. When you enter this mode, the menu you
are in is displayed on the top line and the item you are configuring is displayed in the 2
You can move to the next item by pressing the → button. If you want to get to a submenu
indicated by the current item or if you want to change the configuration settings of the current
IP Extensions in AltiWare OE 4.0, © Copyright 2000, AltiGen Communications, Inc
nd
line.
Page 6/11
Advertisement
Table of Contents
