Toshiba e-STUDIO400P Printing Manual page 75

2.PRINTING FROM WINDOWS
Customization: [PDL Settings] tab
The Printer Driver setting is available only for a Universal Printer driver and a PS3 printer driver.
1) Output PDL
This selects the printer driver language (PDL) to be printed. The setting can be changed only when a Universal Printer
driver is used. The setting is fixed to [PostScript] when a PS3 printer driver is used.
- PCL6 — Select this to print in PCL6.
- PostScript — Select this to print in PostScript.
If [PostScript] is selected in the Universal Printer driver, printing from an application by PostScript pass through
output cannot be performed. Since PostScript is generated via GDI, it is limited to the RGB color space. To perform
pass-through printing from applications which can directly generate PostScript such as Adobe Illustrator, use a PS3
printer driver.
2) Output Format
This selects an output format for PostScript printing. This setting can be changed only when [PostScript] is selected in
the [Output PDL] box.
- ASCII — A job is sent in ASCII format (enabling PostScript code editing with a text editor or a word processor).
- Encapsulated PostScript (EPS) — A job is printed as an image file in EPS format (for PostScript-compatible
printers).
- Using Adobe DSC — A job is sent in PostScript format that is optimized to reduce printing errors.
EPS format is usually used for creating images to be imported into a document. Therefore, only the first page of a
document can be printed when [Encapsulated PostScript (EPS)] is selected. Also the destination where the paper
should exit can be set only by the administrator. For the details, ask your administrator.
3) Print Error Information
This prints PostScript errors which occurred during printing. This setting can be changed only when [PostScript] is
selected in the [Output PDL] box.
4) Compress Bitmap
This sends the compressed bitmaps to this equipment. This setting is displayed only when a Universal Printer driver is
used. Also this setting can be changed only when [PostScript] is selected in the [Output PDL] box.
5) JPEG Compression
This sends compressed JPEG data to this equipment. This setting is displayed only when a Universal Printer driver is
used. Also this setting can be changed only when [PCL6] is selected in the [Output PDL] box.
6) [Restore Defaults]
Click this to restore the factory defaults on the [PDL Settings] tab.
1
2
3
4
5
6
2 PRINTING FROM WINDOWS
Setting Up Print Options 73