Toshiba e-STUDIO400P Printing Manual page 42

2 PRINTING FROM WINDOWS
7) Use Custom Margin
Select this check box to set the margin on the printed pages. When this box is selected, click [Details] to set the
margins in the [Custom Margin] dialog box.
The selectable range of the margin width differs depending on the model.
- For the e-STUDIO6550C Series and e-STUDIO4540C Series
0.17 inch to 3.94 inches / 4.2 mm to 100 mm (The margin width cannot be smaller than 0.17 inches / 4.2 mm.)
For models other than the above, refer to the corresponding Printing Guide.
If [Booklet] is selected on [2-Sided Printing], this option will be disabled.
Enable this function to add the margins if the application does not support the margin function. When the
application has a margin function, use the application's function rather than this option.
This cannot specify the binding margin for Booklet printing.
8) Poster Print
You can divide a print job onto more than one sheet of paper, so you can create one large image, such as a poster, by
connecting the divided images. If this option is enabled, click [Details] and set the Output number of Sheets.
The Poster Print option is not available when any of the Custom Paper Size, Number of pages per sheet, 2-
Sided Printing, Watermark, Overlay Image and Sheet Insertion options is set.
The Poster Print option is available only when any of the sizes below is selected for [Print Paper Size] box on
the [Basic] tab.
A4, A3, LT, LG
[1x2] is selectable only when A4 or A3 is chosen for [Print Paper Size].
For detailed instructions on how to print with the Poster Print option, see the following page:
P.97 "Dividing one image into multiple sheets (Poster Print)"
40 Setting Up Print Options
1x2 2x2 3x3 4x4