Paper Source - Toshiba e-STUDIO400P Printing Manual

4 PRINTING FROM UNIX/Linux

Paper Source

The paper source can be selected using the following options.
Option Value Alternate Value
auto-source
manual
drawer1 upper
cas1
drawer2 lower
cas2
drawer3 pedupper
cas3
drawer4 pedlower
cas4
LCF lcf
In PostScript Deferred Media Selection is always turned on so the paper size has priority over the paper source. In PCL5e
the paper size always has priority over the paper source.
If this option is not specified the command will not be sent so the printer's default value will be used.
Example: The command to specify the Large Capacity Feeder (optional) paper source is "lp - o lcf <filename>".
In the e-STUDIO4540C Series, the 3rd and 4th drawers are optional.
Duplexing
The current duplex mode can be specified using the following options.
Option Value Alternate Value
simplex
duplex lduplex
duplex_long
duplex=long
hduplex
sduplex duplex_short
duplex=short
vduplex
If this option is not specified, the default value "simplex" will be used.
It is not necessary to specify duplexing for Booklet Mode (sduplex). Setting duplexing separately can override the booklet
mode setting for duplexing.
Example: The command to specify long edge duplexing is "lp -o duplex <filename>".
166 Printing From Application
Description
Select auto paper tray selection.
Select Bypass Tray.
Select the 1st drawer.
Select the 2nd drawer.
Select the 3rd drawer (optional).
Select the 4th drawer (optional).
Select the Large Capacity Feeder (optional). The Large
Capacity Feeder (optional) is not available for some
countries or regions.
Description
Turn duplexing off.
Turn duplexing on with long edge binding.
Turn duplexing on with short edge binding.