Table of Contents
Advertisement
3 PRINTING FROM Macintosh
Printing Modes DC
In the Printing Modes DC menu, you can specify your department code, if this equipment is so enabled. Before specifying
the department code, you must check the Department Code option in the Printing Modes menu. Then specify the
department code in this menu.
1
2
3
4
5
How the equipment performs printing for an invalid department code print job, for which an invalid department code is
specified, varies depending on the Invalid Department Code Print Job setting that can be set in the TopAccess
Administrator mode and whether SNMP communication is enabled or not.
-
When SNMP communication is enabled and Invalid Department Code Print Job is set to [Store to invalid job list],
an error message will be displayed when an invalid department code is entered.
-
When SNMP communication is disabled and Invalid Department Code Print Job is set to [Store to invalid job list],
the invalid department code print job will be stored in the invalid department code print job list without printing.
-
When the Invalid Department Code Print Job is set to [Print], the invalid department code print job will be printed.
-
When the Invalid Department Code Print Job is set to [Delete], the invalid department code print job will be deleted.
1) Department Code (DC) - Digit 1
Select the first digit of the department code.
2) Department Code (DC) - Digit 2
Select the second digit of the department code.
3) Department Code (DC) - Digit 3
Select the third digit of the department code.
4) Department Code (DC) - Digit 4
Select the fourth digit of the department code.
5) Department Code (DC) - Digit 5
Select the fifth digit of the department code.
158
Printing From Application on Mac OS X 10.2.4 to Mac OS X 10.6.x
Hide quick links:
Advertisement
Table of Contents
