Toshiba e-STUDIO400P Printing Manual page 16

2 PRINTING FROM WINDOWS
3
Display the [Device Settings] tab menu, and set the following options.
Model Selection — This sets the model type. The setup items of the printer driver are changed according to the
model selected.
If you select [Universal], you can narrow down the setup items of the printer driver to those used commonly in
all of the e-STUDIO Series. It is convenient in such cases as when you are using a printer driver already
installed to other e-STUDIO Series models.
Option — This option sets whether the following optional devices are installed.
Drawers — This sets whether the optional drawers or the Large Capacity Feeder (optional) (not available for
some countries or regions) are installed.
Finisher — This sets whether or not the Finisher (optional) is installed.
Hole Punch Unit — This sets whether or not the Hole Punch Unit (optional) is installed.
External LCF — This sets whether or not the External Large Capacity Feeder (optional) is installed.
Inserter Unit — This sets whether or not the Inserter Unit (optional) is installed.
The Large Capacity Feeder (optional) is not available for some countries or regions.
Setup items differ depending on the model and the option configuration.
For more information about each item, see the descriptions about the [Device Settings] tab.
P.67 "[Device Settings] tab"
4
Click [Drawer Settings].
The [Drawer Settings] dialog box appears.
14 Before Using the Printer Driver