Toshiba e-STUDIO400P Printing Manual page 204

5 MANAGING PRINT JOBS FROM THE CONTROL PANEL
2-SIDED
Set 2-Sided Printing.
1 SIDE — Select this to print only one side.
BOOK — Select this to print on both sides by setting a vertical binding margin. Pages are turned over from right to
left.
TABLET — Select this to print on both sides by setting a horizontal binding margin. Pages are turned over from
bottom to top.
PDF Overprint
If a PDF file contains an overprint, this is also overprinted on a print job when this option is enabled.
OFF — Select this not to overprint the job.
ON — Select this to enable overprint the job.
ON (PDF/X ONLY) — Select this to enable overprint the job only when the original PDF file is complied with PDF/X
specifications.
The paper size can be set only when you print a JPEG file. (If you print more than one JPEG file
continuously, the paper size you set for the first file in this step is applied to the second and the following.)
The PDF Overprint setting is applied only to objects overprinted in the original PDF file. If you want to
preview the effect of overprint in the PDF file, you can do it with the Overprint Preview mode of Adobe
Reader by switching the preview screen.
202 Monitoring the Print Job Status