Toshiba e-STUDIO400P Printing Manual page 111

2.PRINTING FROM WINDOWS
Inserting from the bypass tray
When the paper is being fed into the equipment
Do not mix paper of different sizes.
Place one sheet at a time on the bypass tray even if you wish to print multiple copies.
Slightly curl the paper. Hold it gently as it is being fed into the equipment.
Be careful not to cut your fingers on the edge of paper when you hold it.
Make sure that the trailing edge of the paper will not be fed into the equipment while you are holding it.
The paper will be printed with a resolution of 300 dpi.
When the paper is coming out of the equipment
Hold the paper gently as it is coming out of the equipment.
Be careful not to cut your fingers on the edge of paper when you hold it.
Do not pull out the paper forcibly as it is exiting from the equipment.
2 PRINTING FROM WINDOWS
Printing With Best Functions for Your Needs 109