Adding A User - Kyocera ECOSYS FS-1035MFP/DP Operation Manual

Adding a User

This adds a new user. You can add Up to 21 users (including the default login user name). The table below explains
the user information to be registered.
User Name*
Login User
Name*
Login
Password*
Access Level*
Account Name
E-mail Address
NOTE:
By default, one of each default user with machine administrator rights and administrator privileges is already
stored. The following are the default user's properties.
User Name: DeviceAdmin
Login User Name: 30 ppm model:3000, 35 ppm model:3500
Login Password: 30 ppm model:3000, 35 ppm model:3500
Access Level: Administrator
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
Use the procedure below to register a new user.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Sys. Menu/Count.: a b
4
User/Job Account
*********************
5
User Property
6
Common Settings
Item
Enter the name displayed on the user list (up to 32
characters).
Enter the login user name to log in (up to 32
characters). The same login user name cannot be
registered.
Enter the password to log in (up to 64 characters).
Select Administrator or User for user access
privileges.
Add an account where the user belongs. The user,
who registered his/her account name, can log in
without entering the account ID. Refer to Job
Accounting on page 11-15.
The user can register his/her E-mail address. The
registered address will be automatically selected
for subsequent operations that need any E-mail
function.
* Mandatory at user registration.
[ Exit
Description
1
Press the System Menu/Counter key on the main unit
operation panel.
2
Press the
]
11-6
or key to select [User/Job Account].
Management