Kyocera ECOSYS FS-1035MFP/DP Operation Manual page 380

Group Auth.:
1 *Off
*********************
2
On
Displaying Network User Propertiy
Use the procedure below to display the property of the user logged on using the network authentication. This menu
can be used only when [Netwk Authentic.] is selected as the user authentication method.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Sys. Menu/Count.: a b
4
User/Job Account
*********************
5
User Property
6
Common Settings
Login User Name:
*******************
Login Password:
User/Job Account: a b
1
User Login Set.
*********************
2
Job Account. Set.
3
Unknown ID Job
7
a b
8
9
1
2
[ Exit ]
L b
[ Login ]
3
4
[ Exit ]
11-12
Press the OK key. Group Auth. appears.
Press the or key to select [On] or [Off].
Press the OK key.
Completed. is displayed and the screen returns to the
User/Job Account menu.
Press the System Menu/Counter key on the main unit
operation panel.
Press the or key to select [User/Job Account].
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
The User/Job Account menu appears.
Press the or key to select [User Login Set.].
Management