Setting Date And Time - Kyocera ECOSYS FS-1035MFP/DP Operation Manual

Setting Date and Time

Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the header
of the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used.
NOTE:
Be sure to set the time difference before setting the date and time.
Sys. Menu/Count.: a b
3
System
4
User/Job Account
5
Common Settings
*********************
Common Settings: a b
1
********************* Language
2
Default Screen
3
Sound
Login User Name: L b
********************
Login Password:
Date Setting:
1
Date/Time
*********************
2
Date Format
3
Time Zone
1
2
3
[ Exit ]
4
5
NOTE:
[ Login ]
machine at the factory.
Login User Name: 30 ppm model:3000, 35 ppm model:3500
Login Password:
6
a b
[ Exit ]
7
2-10
Press the System Menu/Counter key on the main unit
operation panel.
In the Sys. Menu/Count. menu, press the
select [Common Settings].
Press the OK key. The Common Settings menu appears.
Press the or key to select [Date Setting], and press
the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
The following administrator is registered in the
30 ppm model:3000, 35 ppm model:3500
The Date Setting menu appears.
Press the or key to select [Time Zone].
Preparation before Use
or key to