Kyocera ECOSYS FS-1035MFP/DP Operation Manual page 373

Login/Logout
Once you enable user login administration, a login user name and password entry screen appears each time you use
this machine.
Login
Log in using the procedure below.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
Login User Name
*******************
Login Password:
Logout
1
If the screen below appears during the operations,
L b
perform the following login operations.
[ Login ]
2
Press the OK key, enter the login user name, and then
press the OK key.
3
Press the
OK key, enter the login password, and then press the OK
key.
4
Check the login user name and password are correct,
and press [Login] (the Right Select key).
To log out the machine, press the Logout key to return to the
login user name/login password entry screen.
Auto Logout
Logout is automatically executed in the following cases:
• When the machine is in sleep mode
• When auto panel reset is activated
11-5
key to select [Login Password], press the
Management
11