Adjusting Density - Kyocera ECOSYS FS-1035MFP/DP Operation Manual

Adjusting Density

Use the procedure below to adjust the density when scanning the originals.
The table below shows the available settings.
Manual
Auto
The procedure for adjusting the density is explained below.
Function Menu:
1 Color Selection T
*********************
2
Original Size
3
Original Image
Density:
1 Auto
2 *Manual *********************
Item
Adjust density using 7 levels.
Optimum density is selected according to the
density of the original.
a b
T
T
[ Exit ]
a b
Detail
1
Press the Send key.
2
Place the original.
3
Press the Function Menu key. Function Menu appears.
4
Press the or key to select [Density].
5
Press the OK key. Density appears.
6
Press the or key to select [Auto] or [Manual].
If you select [Manual], press the OK key, and then select
the density on the next screen.
7
Press the OK key.
Completed. is displayed and the screen returns to the
basic screen for sending.
8
Specify the destination, and press the Start key to start
sending.
NOTE:
Press the Reset key to reset the settings selected in
Function Menu.
5-11
Sending Functions
5