Kyocera ECOSYS FS-1035MFP/DP Operation Manual page 228

Timer Setting:
1
********************* Sleep Timer
2
PanelReset Timer
3
Power Off Rule
Auto Err. Clear: a b
1 *Off
*********************
2
On
• Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options are
between 5 and 495 seconds (every five seconds). The default setting is 30 seconds.
If you set 0 as the time, errors are not displayed.
NOTE:
If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.
Sys. Menu/Count.: a b
3
System
4 User/Job Account
5
Common Settings
*********************
Common Settings: a b
1
********************* Language
2 Default Screen
3
Sound
4
a b
[ Exit ]
5
6
7
8
1
[ Exit ]
2
[ Exit ]
3
8-34
The Timer Settings menu appears.
Press the or key to select [Auto Err. Clear].
Press the OK key. Auto Err. Clear appears.
Press the or key to select [Off] or [On].
Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
In the Sys. Menu/Count. menu, press the
select [Common Settings].
Press the OK key. The Common Settings menu appears.
Press the or key to select [Timer Setting], and press
the OK key.
Default Setting (System Menu)
or key to