Duplex Sending - Kyocera ECOSYS FS-1035MFP/DP Operation Manual

Duplex Sending

Select the type and binding of original depending on the original.
The table below lists the binding directions for each original type.
Original
1-sided Sheet Original
2-sided Sheet Original
Use the procedure below to select the original type and binding direction when sending scanned originals.
Function Menu:
1 Color Selection T
*********************
2 Original Size
3
Original Image
Duplex:
1 *1-sided
*********************
2 2-sided
Type
1-sided
2-sided
1
2
3
a b
T
T
[ Exit ]
4
5
a b
6
7
8
NOTE:
Function Menu.
5-6
Binding
—
Binding Left/Right,
Binding Top
Press the Send key.
Place the originals on the document processor.
Press the Function Menu key. Function Menu appears.
Press the or key to select [Duplex].
Press the OK key. Duplex appears.
Press the or key to select [1-sided] or [2-sided].
If you select [2-sided], press [Detail] (the Right Select
key), select the binding edge and press the OK key, and
then select the original setting orientation on the next
screen.
Press the OK key.
Completed. is displayed and the screen returns to the
basic screen for sending.
Specify the destination, and press the Start key to start
sending.
Press the Reset key to reset the settings selected in
Sending Functions
Binding
—
Top Edge Top,
Top Edge Left