Minimum Flow Adjustment For Hob Gas Taps - Baumatic Royal Chiantishire BRC3BDY User Manual

M inimum flow adjustment for hob gas taps.
All work must be carried out by a CORGI registered
engineer.
o Unscrew the adjusting screw, in order to increase the gas flow
or tighten the adjusting screw
o The correct adjustment is ob
length of about 3 – 4 mm.
o For butane/propane gas, th
screwed in.
o Refit the control knob.
o Make sure that the flame does not go out by quickly turning
from maximum flow to mini
the control knob and make further adjustments to the gas
flow, testing it again once the adjustment has been made
o Switch the burner on and
set the knob at the
minimum position.
o Remove the knob from
the tap and place a small
blad ed screwdriver to
the outside the tap.
to decrease the gas flow.
tained when the flame has a
e adju sting screw must be tightly
mum flow . If it does then remove
30
.