Replacing The Mains Supply Cable - Baumatic Royal Chiantishire BRC3BDY User Manual

o The cable can be looped if necessary, but make sure that is no
kinked or trapped when the cooker is in position.
R eplacing the mains supply cable
If the mains supply cable is damaged, then it must be replaced by an
ap propriate replacement which can be obtained from the Baumatic
Spa e r s Department.
The m ains supply cable should be replaced in accordance with the
following instructions:
o Switch the appliance off at the control switch.
o Open the box of the supply board.
o Unscrew the clamp (A) fixing the cable.
Replace the cable with one of the same length and in accordance
o
with the specification given above.
o The "green-yellow" ea th wire must be connected to the ter
marked . It must be about 10 mm longer than the live and
neutral wires.
o The "blue" neutral wire
marked with letter (N)
terminal marked with le
r
must be connected to the terminal
- the live wire must be connected to the
tter (L).
33
t
minal