Leveling The Appliance And Extra Support - Baumatic BT2385SS Instruction Manual

Leveling the appliance and extra
support
(certain models only)
The height of the cooker with the support is
90 cm, and without support it is 85 cm. Left
and right side of the support is equipped
with two wheels to facilitate relocation. In
the front part, on both sides there are two
adjustable screws, used to level the cooker
and adjust its upper edge in line with the
adjacent kitchen furniture.
Adjustable legs are accessible when the
drawer is pulled out. Adjust the position of
the cooker by turning the legs in one
direction or another. Adjustable legs will be
turned easier if the appliance is somewhat
lifted up and tilted.
Additional support may be removed by
unscrewing the four screws holding it to the
bottom of the cooker. In such case relocate
the
Some cookers are equipped with four
adjusting screws (two in front and two at the
back), used for leveling the appliance or
adjusting its heights to match the adjacent
furniture.
Instructions for use, installation and connection
29