Replacing An Oven Light Bulb - AEG COMPETENCE D8100-1 Operating Instructions Manual

Build-in electric multifunction double oven

Hide thumbs Also See for COMPETENCE D8100-1:

Table of Contents

REPLACING AN OVEN LIGHT BULB

The oven light illuminates the main oven when the

function is chosen, or when a main oven function and

temperature are selected.

The second oven light illuminates when the Second

oven light function is selected, or when a cooking

function and temperature are selected.

The type of bulb required is a 300°C 25 watt small

Edison Screw.

(Available through Service Force Centres).

Disconnect

electricity supply before replacing the bulb.

1. Make sure the appliance is cool before replacing the

bulb.

2. Open the oven door and remove the shelves and

wirework runners.

Instructions on how to remove the wirework

runners are given on page 37.

3. Pull the glass bulb cover towards you and then pull

it off. If necessary, use a screwdriver to carefully

lever off the cover, taking care not to damage the

oven cavity.

4. Unscrew the bulb by turning it to the left.

5. Fit a new bulb and then replace the glass bulb

cover.

6. Replace the oven shelves.

7. Restore the electricity supply and reset the time of

day.

the

appliance

from

the

Table of Contents