Replacing An Oven Light Bulb - AEG COMPETENCE CD4150-1B Operating Instructions Manual

REPLACING AN OVEN LIGHT BULB

The type of bulb required is a 300°C 25 watt small
Edison Screw.
(Available through Service Force Centres).
Disconnect the appliance from the
electricity supply before replacing the
bulb.
1. Make sure the appliance is cool before
replacing the bulb.
2. Open the oven door and remove the shelves
and wirework runners.
Instructions on how to remove the wirework
runners are given on page 31.
3. Pull the glass bulb cover towards you and then
pull it off. If necessary, use a screwdriver to
carefully lever off the cover, taking care not to
damage the oven cavity.
4. Unscrew the bulb by turning it to the left.
5. Fit a new bulb and then replace the glass bulb
cover.
6. Replace the oven shelves.
7. Restore the electricity supply and reset the time
of day.
34