Table of Contents
Advertisement
TO REPLACE THE INNER GLASS
PANEL
1. Holding the glass panel in your right hand fully
open the oven door with your left.
2. Gently ease and push the glass into the
location
points
under
lowering and sliding the glass into position
under the hinge location points at the rear.
Ensure the glass is properly located.
Do not attempt to use the oven without the
glass being in place.
CLEANING THE GRILL AND OVEN
FURNITURE
All removable parts, except the grill pan handle can
be washed in the dishwasher. Alternatively soak
them in hot soapy water if heavily soiled. They will
then clean more easily.
The grill pan, meat tin, trivet and grill deflector may
be cleaned using a soap impregnated steel wool
pad. The grill pan grid and oven shelves should be
cleaned using hot soapy water. Soaking first will
make cleaning easier.
REPLACING AN OVEN LIGHT BULB
The type of bulb required is a 300C 25 watt small
Edison Screw.
(Available through AEG Service Centres).
Disconnect
electricity supply before replacing the
bulb.
1. Make sure the cooker is cool before replacing
the bulb.
2. Open the oven door and remove the shelves.
3. Pull the glass bulb cover towards you and then
pull it off. If necessary, use a screwdriver to
carefully lever off the cover, taking care not to
damage the oven cavity.
4. Unscrew the bulb by turning it to the left.
5. Fit a new bulb and then replace the glass bulb
cover.
6. Replace the oven shelves.
7. Restore the electricity supply and reset the time
of day.
the
handle
the
cooker
from
before
the
25
Advertisement
Table of Contents
