Agilent Technologies 3458A Calibration Manual page 95

8 / System Specifications
Function-Range-Measurement
The time required to program via GPIB a new measurement configuration, trigger a reading, and return the
result to a controller with the following instrument setup: PRESET FAST; DELAY 0; AZERO ON;
OFORMAT SINT; INBUF ON; NPLC 0.
TO - FROM Configuration Description
DCV £ 10 V to DCV £10 V
any DCV / OHMS to any DCV / OHMS
any DCV/OHMS to any DCV/ OHMS with DEFEAT ON 150/sec
TO or FROM any DCI
TO or FROM any ACV or ACI
Selected Operating Rates
Conditions
DCV Autorange Rate (100 mV to 10 V)
Execute simple command changes (CALL, OCOMP, etc.)
Readings to GPIB, ASCII
Readings to GPIB, DREAL
Readings to GPIB, DINT
Readings to internal memory, DINT
Readings from internal memory to GPIB, DINT
Readings to GPIB, SINT
Readings to internal memory, SINT
Readings from internal memory to GPIB, SINT
Maximum internal trigger reading rate
Maximum external trigger reading rate
Memory
Reading Storage (16 bit)
Non-volatile, for subprograms
and / or state storage
Delay Time
Accuracy ±0.01% ± 5 ns
Maximum 6000 s
Resolution 10 ns
Jitter 50 ns pk-pk
GPIB Rate
180/sec
85/sec
70/sec
75/sec
2
Standard
Readings Bytes
10,240 20 k
14 k
Timer
Accuracy
Maximum
Resolution
Jitter
1
Subprogram Rate
340/sec
110/sec
270/sec
90/sec
90/sec
Rate
110 / sec
330 / sec
630 / sec
1000 / sec
50,000 / sec
50,000 / sec
50,000 / sec
100,000 / sec
100,000 / sec
100,000 / sec
100,000 / sec
100,000 / sec
Option 001
Readings Bytes
+65,536 +128 k
±0.01% ±5 ns
6000 s
100 ns
<100 ps rms
Appendix A Specifications
1. Using HP 9000 Series
350.
2. SINT data is valid for
APER £10.8µs.
95