Calstr - Agilent Technologies 3458A Calibration Manual

CALSTR

Description
Remarks
Examples
74 Chapter 5 Command Summary
Calibration String (remote only). Stores a string in the multimeter's
nonvolatile calibration RAM. Typical uses for this string include the date or
place of calibration, technician's name, last CALNUM value, or the
scheduled date for the next calibration.
Syntax
CALSTR string[,security_code]
This is the alpha/numeric message that will be appended to the
string
calibration RAM. The string parameter must be enclosed in single or double
quotes. The maximum string length is 75 characters (the quotes enclosing
the string are not counted as characters).
security_code
you must include the security_code in order to write a message to the
calibration RAM. (You can always read the string using the CALSTR?
command regardless of the security mode). Refer to the SECURE command
for information on securing and unsecuring the calibration RAM.
•
Query Command. The CALSTR? query command returns the character
string from the multimeter's calibration RAM. This is shown in the
second example below.
•
Related Commands: CAL, CALNUM?, SCAL, SECURE
CALSTR
OUTPUT 722; "CALSTR 'CALIBRATED 04/02/1987; temp(C)=43.1'"
CALSTR?
10 DIM A$[80]
20 OUTPUT 722; "CALSTR?"
30 ENTER 722;A$
40 PRINT A$
50 END
When the calibration RAM is secured (SECURE command)
!DIMENSION STRING VARIABLE
!READ THE STRING
!ENTER STRING
!PRINT STRING