2
Operations and Features
3 Press
4 Press
5 Use
6 Press
7 Press
8 Press
Hold
The reading hold feature allows you to capture and hold a reading on the front
panel display. When enabled, the Hold operation turns on the Hold
annunciator and hold the reading.
Procedure
1 Press
Figure 2-6 Typical Hold operation display
26
to store the specified value.
to enter the lower limit setup mode.
The lower limit is shown on primary display while the LO annunciator is
shown on secondary display.
,
,
to store the specified value.
to enable the Comp operation.
to disable the Comp operation or exit.
to hold the reading on the display.
, and
to modify the lower limit.
U3402A User's and Service Guide