Cleaning The Printer; Cleaning The Outside Of The Printer; Cleaning The Density Sensor - Xerox Phaser 6300 User Manual
Xerox color laser printer user guide phaser 6300, phaser 6350
Hide thumbs
Also See for Phaser 6300:
- Service manual (555 pages) ,
- User manual (120 pages) ,
- Advanced features manual (98 pages)
Table of Contents
Advertisement
Cleaning the Printer
This section includes:
■
Cleaning the Outside of the Printer
■
Cleaning the Density Sensor
See also:
User Safety
on page A-1
Cleaning the Outside of the Printer
To remove stains, clean the outside of the printer using a soft, damp, cloth moistened with a
mild neutral detergent. Do not spray detergent directly onto the printer.
Warning:
To prevent electric shock, turn the printer off and unplug the power cord from the
electrical outlet before cleaning the printer.
Use only an approved toner vacuum to clean the printer. Do not lubricate the printer with oil.
Cleaning the Density Sensor
The printer displays a message when the density sensor needs cleaning. To clean the density
sensor:
1.
Push up the latch on the front of the printer to open Front Door A.
on page 5-2
on page 5-2
Phaser® 6300/6350 Color Laser Printer
5-2
Cleaning the Printer
6300-006
Advertisement
Table of Contents
