Quick Install Steps For Mac Os X, Version 10.2 (Rendezvous) - Xerox 6250DP - Phaser Color Laser Printer Reference Manual

3.
Select Add Printer, then select AppleTalk from the pull-down list.
4.
Select the appropriate zone.
5.
Select your printer from the list provided.
6.
Select the appropriate PPD from the list in the Printer Model drop-down list. If your
printer's PPD is not listed, install it from the Printer Installer and Utilities CD-ROM.
7.
Click Add to complete the configuration.

Quick Install Steps for Mac OS X, Version 10.2 (Rendezvous)

Requirements
Verify that you are running Mac OS X, version 10.2 or later. Also ensure that you have run the
installer from the Printer Installer and Utilities CD-ROM to install the proper printer drivers
for your printer.
1.
Open the Print Center Utility (located in Utilities in the Applications Directory).
2.
Click Add.
A list appears displaying your printer's name, followed by a series of numbers. For
example, Your Printer's Name xx:xx:xx. Each numbered segment represents the last
section of your printer's hardware address. Your PPD is automatically selected.
3. Click Add to complete the installation.
Setting Up the Macintosh Ethernet Port for TCP/IP or AppleTalk
Perform the following procedure to set up your Macintosh for TCP/IP:
1.
Select Network from the System Preferences application, then select TCP/IP.
2.
Select Built-In Ethernet from the Active Ports menu.
3.
Specify how you will obtain the IP address from the TCP/IP tab:
■ Manually: Specify the IP address, Subnet Mask, Router Address, and Name Server
Address in the dialog box.
■ DHCP: If you wish to use AppleTalk, select the AppleTalk tab and verify that the
Make AppleTalk Active box is selected.
4.
Close the dialog box.
Creating an LPR Printer with Mac OS X, Version 10.2
1.
Open the Print Center Utility (located in Utilities in the Applications Directory).
2.
Click Add.
3.
Select IP Printing from the drop-down list.
4.
Enter your printer's IP address.
5.
Deselect Use default queue on server box.
6.
Type AUTO in the Queue Name field.
7.
Select the appropriate PPD from the list displayed in the Printer Model drop-down list.
8.
Click Add.
Phaser® 6250 Color Laser Printer
3-36
Macintosh