Accessing Power Saver; Accessing Intelligent Ready Mode - Xerox 6250DP - Phaser Color Laser Printer Reference Manual

Phaser 6250 series
Hide thumbs Also See for 6250DP - Phaser Color Laser Printer:
Table of Contents

Advertisement

Printing the Startup Page
To print the "Startup Page":
1.
Select Information, then press the OK button.
2.
Information
Select
3.
Startup
Page, then press the OK button to print.
Select

Accessing Power Saver

To save energy, the printer enters a Power Saver, low-energy consumption mode after a pre-
defined period of time since its last activity. In this mode, most printer electrical systems are
shut down. When a print job is sent to the printer, the printer enters Warmup Mode. You can
also warm up the printer by pressing the OK button on the front panel.
If you find that the printer is going into Power Saver mode too often and you do not want to
wait while the printer warms up, increase the length of time before the printer goes into Power
Saver mode. Change the timeout value as follows:
1.
At the printer's front panel, select
2.
Printer
Controls, then press the OK button.
Select
3.
Power Saver
Select
4.
Press the Down Arrow or Up Arrow button to scroll to a selected Power Saver timeout
value. Select a larger value if you want to extend the length of time before the printer goes
into Power Saver mode.
5.
Press the OK button.

Accessing Intelligent Ready Mode

Intelligent Ready mode is an automated system that:
Monitors the printer's usage.
Warms up the printer when you are most likely to need it based on past usage patterns.
Activates the Power Saver mode when the printer times out.
To turn on/off the Intelligent Ready mode, use either:
The printer's front panel
CenterWare IS
Using the Printer's Front Panel
To turn Intelligent Ready mode on/off:
1.
Printer
Setup, then press the OK button.
Select
2.
Select
Printer
Controls, then press the OK button.
3.
Intelligent
Ready.
Select
4.
Press the OK button to turn on/off
5.
Select Exit, then press the OK button to return to the main menu.
Pages, then press the OK button.
Printer
Setup, then press the OK button.
Timeout, then press the OK button.
Intelligent
Phaser® 6250 Color Laser Printer
1-15
Ready.
Printer Settings

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 6250bPhaser 6250nPhaser 6250dtPhaser 6250dx

Table of Contents