Options And Features; Compatibility - Lexmark C920 Service Manual

5056-XXX

Options and features

Compatibility

The Lexmark C920 color printer supports only Lexmark C920 paper-handling options. The Lexmark C920 media
options include:
•
550-sheet optional drawer–can be installed beneath the printer to offer an added input source which
holds approximately 550 sheets of 20 lb paper. Multiple optional drawers are supported simultaneously (up
to four drawers). For capacity estimates on other media types, see Media Support.
•
2x550-sheet drawer with printer stand–supports A3, A4, JIS-B4, letter, legal, and tabloid (11x17")
sizes. Only paper (16—32 lb or 60—120 g/m
550—sheet trays.
•
Duplex unit–offers two-sided printing capability for the Lexmark C920. The duplex option may be
installed by the customer on the left side of the printer, or may be shipped inside the printer (dn and dtn
models). Duplex does not support card stock, transparencies, labels, or envelopes. For media weights
supported by the duplex unit, see Media Support.
•
High-capacity feeder–provides an additional input tray (tray 3 or 5, depending on the configuration) with
a total capacity of 3000 sheets, 20 lb (75 g/m
capacity feeder is installed by the customer to the right side of the printer. The input trays support sensing
for size (see supported sizes below), tray low, and tray empty.
Characteristics
—
Capacity–3000 sheets, 20 lb (75 g/m
—
Media type support–paper bond
—
Sizes supported (with auto size sensing)–A4 and letter, 16—28 lb
(60-105 g/m
—
Card stock, transparency, labels, or envelopes are not supported.
—
The HCF requires its own line cord
•
Finisher– offers stapling, hole punching, offset stacking, and an additional output bin. Two models are
available. 3- or 4-hole left-edge hole punching is available. The single staple position is the upper left
corner. The finisher can support up to 1,100 sheets of unstapled, un-punched media. For stapled media,
the output bin supports up to 30 stapled sets or 1,000 sheets. The stapler can staple a maximum of 30
sheets per set. Each printer can support a single finisher.
1-2
Service Manual
2
) may be used from the two trays in this drawer. Includes two
2
2
)
2
) A4/letter, plain paper). The Lexmark C920 optional high-
) plain paper