Lexmark C920 Service Manual page 82

5056-XXX
Message
56 Parallel port <x> disabled
56 Std parallel port disabled
56 Serial port <x> disabled
56 USB port <x> disabled
57 Configuration change, some
Held Jobs were lost
58 Input config error
58 Too many disks installed
58 Too many flash options
installed
58 Too many bins attached
61 Defective disk
62 Disk full
2-40
Service Manual
Meaning
Data has been sent to the printer
through a disabled parallel port.
Data has been sent to the printer
through a disabled serial port.
Data has been sent to the printer
through a disabled USB port.
Self explanatory.
Self explanatory.
Self explanatory.
Self explanatory.
Self explanatory.
Action
-Select Continue to clear the
message.
The printer discards any data
received through the parallel port.
-Make sure the Parallel Buffer menu
item is not set to Disabled.
-Select Continue to clear the
message.
The printer discards any data
received through the serial port.
-Make sure the Serial Buffer menu
item is not set to Disabled.
-Select Continue to clear the
message.
The printer discards any data
received through the USB port.
-Make sure the USB Buffer menu
item is not set to Disabled.
Select Continue to clear the
message.
One of the input trays failed, and the
large capacity feeder is now
configured incorrectly. The large
capacity feeder must be installed as
Tray 3 or Tray 5.
1. Turn off and unplug the printer.
2. Replace or remove the failed
input tray.
3. Plug in the printer, and turn it on.
1. Turn off and unplug the printer.
2. Remove the excess hard disks.
3. Plug in the printer, and turn it on.
1. Turn off and unplug the printer.
2. Remove the excess flash
memory.
3. Plug in the printer, and turn it on.
1. Turn off and unplug the printer.
2. Remove the additional bins.
3. Plug in the printer, and turn it on.
-Select Continue to clear the
message and continue printing.
-Install a different hard disk before
you perform any operations that
require a hard disk.
-Select Continue to clear the
message and continue processing.
Any information not previously stored
on the hard disk is deleted.
-Delete fonts, macros, and other data
stored on the hard disk.
-Install a larger hard disk.