Printer Memory; Memory Configuration; Available Memory Options; Memory And Expansion Slots - Lexmark C920 Service Manual

5056-XXX

Printer memory

Memory configuration

DRAM memory
Lexmark C920 (base)
Lexmark C920n
Lexmark C920dn
Lexmark C920dtn

Available memory options

•
128, 256, and 512 MB DIMMS are available from Lexmark.
•
32 and 64 MB flash DIMMS are available from Lexmark.

Memory and expansion slots

There is one slot available for memory expansion.
DDR-DRAM and Flash memory options are interchangeable within any of the memory slots available on the
Lexmark C920 system board. However, only one Flash memory option is recognized at a time. If multiple Flash
memory options are installed, the system recognizes the largest one.
There is a USB port on the operator panel for printing PDF print jobs. The USB port only works with certain USB
1.1 thumb drives.

Resident fonts

Emulation
PCL 6
PostScript
PPDS
For a listing of specific fonts, visit www.lexmark.com.
There are 83 symbol sets in the PCL 6 emulation to support all the languages that use these characters.
Not all symbol sets are supported by all fonts. Refer to the Technical Reference or use the printer operator panel
to find which symbol sets are supported by each font.
Support for the euro currency character is included in all applicable fonts for both PostScript and PCL
emulations. Twelve PCL symbol sets support the euro character, including all seven Windows symbol sets.
Additional fonts can be downloaded to the printer RAM, optional Flash DIMM, or hard disk. PCL emulation
supports both scalable and bitmapped downloadable fonts. PostScript emulation supports only downloadable
scalable fonts.
1-6
Service Manual
Standard
256 MB
256 MB
256 MB
512 MB
Scalable Fonts
89
158
39
Maximum
1024 MB
1024 MB
1024 MB
1024 MB
Bitmapped fonts
2
0
5