Lexmark C920 Service Manual page 73

Message
Color Photo Dev Life Warning
Copies
Defragmenting Flash
DO NOT POWER OFF
Delete
Delete all
Delete all confidential jobs
Deleting
Disabling DLEs
Disabling Menus
Disk corrupted
Disk Recovery x/5 yyy%
Empty box M
Enabling Menus
Encrypting Disk yyy%
DO NOT POWER OFF
Engine Warming
Meaning
The color photodevelopers are
nearing the end of life.
The printer is defragmenting its
flash memory.
Delete a print job in the printer's
queue.
Delete all print jobs in the printer's
queue.
Delete all confidential jobs in the
printer's queue.
The printer is deleting print jobs.
The printer is responding to a
request to disable the menus.
The printer has attempted a disk
recovery process, and cannot
repair the disk.
The printer is attempting to
recover the hard disk. Disk
recovery takes place in five
phases; the operator panel
displays the percent complete of
the current phase.
The hole punch box on the
finisher is full.
The printer is responding to a
request to make the menus
available to users.
The printer is encrypting the hard
disk. The percent complete is
displayed.
The printer is warming the fuser
assembly.
Action
-Select Continue to continue
printing without replacing the color
photodevelopers.
-Replace the color photodevelopers.
Enter the desired number of copies.
Warning: Do not turn the printer off
while this message is displayed.
Wait for the message to clear.
-Select Continue to delete the
specified job.
-Press Stop to cancel the operation.
-Select Continue to delete all held
jobs.
-Press Stop to cancel the operation.
-Select Continue to delete all
confidential jobs.
-Press Stop to cancel the operation.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear.
Note: While the menus are disabled,
you cannot change the printer
settings from the operator panel.
-Select Continue to reformat the
disk and delete all files currently
stored on the disk.
-Select Do not reformat to clear
the message without reformatting
the disk.
Do not turn the printer off while this
message is displayed.
Wait for the message to clear.
Empty the hole punch box, and if
necessary, reset the hole punch
counter.
Select Continue to clear the
message and print without using the
hole punch feature.
Wait for the message to clear.
Warning: Do not turn the printer off
while this message is displayed.
Wait for the message to clear.
Wait for the message to clear.
Diagnostic information
5056-XXX
2-31