Adjusting The Wheels - Lexmark C920 Service Manual

5056-XXX
4.
Roll the finisher toward the printer until the finisher locks to the docking pins.
You hear a click when the finisher locks into position.

Adjusting the wheels

Adjust the wheels on the end of the finisher so the stand remains aligned when moved.
To adjust and lock the wheels:
1.
Rotate the left and right upper adjustment knobs on the rear wheels until the wheels touch the floor.
To lower the wheels, rotate the adjustment knobs clockwise.
2.
Turn the wheels until the locking knobs are aligned with the finisher base.
3-64
Service Manual