Tray, Paper Exit Removal; Belt Up/Down Clutch Removal - Lexmark C920 Service Manual

5056-XXX

Tray, paper exit removal

1.
Unlatch the hinge at the back side, then unlatch the hinge on the front side.
2.
Remove the paper exit tray.

Belt up/down clutch removal

1.
Remove the RIP cover, electronic box, printer controller card, and HVPS board.
2.
Unplug the belt up/down clutch cable from CN1 in the CK1 daughter card board.
3.
Remove the C-clip from the belt up/down clutch, and remove the clutch.
4-12
Service Manual