Adjusting Toner Darkness; Printing From A Flash Drive - Lexmark MS510dtn Quick Reference

2 Select Portrait Width or Portrait Height, and then press
3 Press the left or right arrow button to change the setting, and then
press .

Adjusting toner darkness

Using the Embedded Web Server
1
Open a Web browser, and then type the IP address of the printer
in the address field.
Notes:
• View the printer IP address in the TCP/IP section in the
Network/Ports menu. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to
load the Web page correctly.
2 Click Settings > Print Settings > Quality Menu > Toner Darkness.
3 Adjust the toner darkness, and then click Submit.
Using the printer control panel
1
From the printer control panel, navigate to:
> Settings > > Print Settings >
Menu > > Toner Darkness
2 Adjust the toner darkness, and then press

Printing from a flash drive

Notes:
• Before printing an encrypted PDF file, you will be prompted to
enter the file password from the printer control panel.
•
You cannot print files for which you do not have printing
permissions.
1
Insert a flash drive into the USB port.
.
Notes:
•
A flash drive icon appears on the printer control panel and in
the held jobs icon when a flash drive is installed.
• If you insert the flash drive when the printer requires
> Quality
attention, such as when a jam has occurred, then the printer
ignores the flash drive.
• If you insert the flash drive while the printer is processing
other print jobs, then Busy appears. After these print jobs
.
are processed, you may need to view the held jobs list to
print documents from the flash drive.
Warning—Potential Damage: Do not touch the printer or the
flash drive in the area shown while actively printing, reading, or
writing from the memory device. Loss of data can occur.
2
2 From the printer control panel, select the document you want to
print.
3
Press the left or right arrow button to specify the number of copies
for printing, and then press .
Notes:
•
Do not remove the flash drive from the USB port until the
document has finished printing.
• If you leave the flash drive in the printer after leaving the
initial USB menu screen, then access held jobs from the
printer control panel to print files from the flash drive.