LEVELING THE UNIT
IMPORT T T T T ANT
It is extremely important that the unit is level. If it is not level, the ice mold will not fill
evenly. This can cause a reduction in ice rate, uneven sized cubes or water spilling into
the storage area which will cause the ice in the bin to melt pre-maturely. Remember that
floors near drains have a tendency to slope towards the drain.
Use a level to check the levelness of the ice maker
from front to back and from side to side (see Figure
If the ice maker is not level, adjust the feet on the
corners of the unit as necessary (see Figure 12).
Check the levelness after each adjustment and
repeat the previous steps until the unit is level.
TURN FOOT TO ADJUST