Table of Contents
Advertisement
3
Remove top hinge (3 screws), reinstall hinge screw pin, and
remount on opposite side BOTTOM (see Figure 17).
4
Remove the two door closer inserts from the existing bottom
hinge and install as shown on the new bottom hinge (see
Figure 18).
5
Remove existing bottom hinge (3 screws) and remount on
opposite side TOP. Remove hinge screw pin.
6
With bottom of door facing up, remove pivot plate (2 screws),
flip over, and remount on opposite side of door (see Figure 19).
7
Holding door upright with top of door tilted forward, place hole of
door pivot plate on bottom hinge screw pin (see Figure 20). Be
sure that the bosses on the closers align with holes in hinge
and hinge plate.
8
Tilt top of door into position in top hinge and install top hinge
screw pin.
9
In empty hinge holes, install plastic screw plugs (3 top and 3
bottom) and door hole plug (1,door top) removed in step 2.
Door Reversal
HINGE
SCREW
17
PIN
Figure 17
DOOR
CLOSER
INSERTS
BOSS
Figure 18
Figure 19
Figure 20
BOSS
CLRCO008
UL313
UL312
UL319
Advertisement
Table of Contents
