CONNECTING THE WATER SUPPLY
When connecting the water supply, follow these guidelines:
Review the local plumbing codes before you install the unit.
The water pressure should be between 20 and 120 psi.
If you are using a filter system you will need to have at least 20 psi for 3 minutes every
Make certain a SHUT-OFF VALVE is
installed in the 1/4 inch water supply line.
Connect sufficient tubing to the unit to allow
the unit to be moved for cleaning and
servicing. However, make certain that the
tubing is not pinched or damaged during
Electrolux recommends the use of copper
tubing for installation.
Water Supply Connection