Removing The Display; Unplugging The Display Cable; Removing The Display Hinge Screws - Acer 390 Series Service Manual

4.6.2

Removing the Display

Follow these steps to remove the display:
1. Remove two screws on the bottom and two screws on the rear of the unit.
Figure 4-13

Unplugging the Display Cable

2. Open the display and remove two screws; then pull up the display cable (CN9) and unplug the
inverter cable (CN8).
Figure 4-14

Removing the Display Hinge Screws

Disassembly and Unit Replacement 4-13