Download  Print this page

Software Configuration And Specification; Bios; Hotkey Descriptions - Acer 390 Series Service Manual

Notebook computer.
Hide thumbs

Advertisement

1.5

Software Configuration and Specification

1.5.1

BIOS

The BIOS is compliant to PCI v2.1, APM v1.2, E-IDE and PnP specification. It also defines the
hotkey functions and controls the system power-saving flow.
1.5.1.1
Keyboard Hotkey Definition
The notebook supports the following hotkeys.
Table 1-30

Hotkey Descriptions

Hotkey
Icon
Fn-Esc
Fn-F1
?
Fn-F2
Fn-F3
Fn-F4
Fn-F5
Fn-F6
Fn-F7
Fn-
Fn-
Fn-T
When the available hotkey is toggled, the system will issue a beep to enter the
assigned process.
System Introduction
Function
Hotkey Escape
Hotkey Help
Brightness Control
Contrast Control
Display Toggle
Battery Gauge
Volume Control
Setup
Hibernation/Standb
y
Scale Increase
Scale Decrease
Toggle Touchpad
Exits the hotkey control.
Displays the hotkey list and help. Press
Toggles between brightness control and contrast control.
Press the scale hotkeys (Fn-
decrease the brightness or contrast level.
Notebooks with TFT displays do not show the brightness
control icon.
Switches display from LCD to CRT to both LCD and CRT.
Displays the battery gauge.
Press the scale hotkeys (Fn-
decrease the output level.
Gains access to BIOS Setup's Advanced System
Configuration parameters.
Enters hibernation mode if the 0-volt suspend function is
installed and enabled; otherwise, the notebook enters standby
mode.
Increases the setting of the current icon.
Decreases the setting of the current icon.
Turns the internal touchpad on and off.
Description
|
to exit the screen.
and Fn - ) to increase and
and Fn- ) to increase and
1-23

Advertisement

Table of Contents

   Related Manuals for Acer 390 Series

Comments to this Manuals

Symbols: 0
Latest comments: