Installation Tips - Acer Altos R720 Installation & Configuration Manual

Onboard Chipset
Onboard Gigabit
Ethernet
Onboard VGA
Onboard USB 2.0

Installation Tips

NOTE. You need to apply the integrated SAS hardware RAID and NIC driver
during the installation. If you do not have the optional internal USB floppy
drive, you need an external USB floppy drive.
Make a driver diskette for integrated SAS hardware RAID and onboard
1.
Intel 82563EB Gigabit Ethernet from EasyBUILD 7.1 build 100.
Boot the system from the NetWare 6.5 SP5 OS CD.
2.
At Welcome to the NetWare 6.5 server installation page, select Manual to
3.
install.
At Prepare boot partition page, create one 500 MB DOS partition.
4.
When you see the following message, please select Modify. Then, move
5.
the cursor to Storage adapters and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types
-----------------------
Storage adapters:
Please press Delete to delete MEGA_SAS.HAM modules
6.
Then, press INSERT key to insert the integrated SAS hardware RAID driver.
7.
After the drivers are successfully loaded, please select Return to driver
summary.
Continue the installation.
8.
When you see the following message, please select Modify. Then, move
9.
the cursor to Network boards and press Enter.
The following device drivers were detected for this
server. Add, change, or delete device drivers as
needed.
Device types
-------------------------
Network boards:
85
N/A OS built-in
9.22 EasyBUILD 7.1 build 100 (or later)
N/A OS built-in
N/A OS built-in
Driver names
--------------
IDEATA, IDEATA, MEGA_SAS
Driver names
--------------
Altos R720 Installation Configuration Guide