Gigabit Ethernet Driver Installation - Acer Altos R720 Installation & Configuration Manual

Altos R720 Installation Configuration Guide
Please insert the EasyBUILD 7.1 build 100 into the optical drive
2.
Expand Drivers -> Altos R720 -> Chipset, select Windows Server 2003 x64
3.
and click on Setup.
Follow the instruction to install the driver and reboot the server after the
4.
chipset driver is installed.

Gigabit Ethernet Driver Installation

There are two Ethernet Controller listed under Other device in Windows
1.
Device Manager. It should be the onboard Intel 82563EB Gigabit Ethernet
controller. You could find the driver in EasyBUILD 7.1 build 100. Please do
the same on both of the devices.
Right-click on the Ethernet Controller and select Update Driver.
2.
Select No, not this time. Do not connect to Windows Update to search the
3.
driver.
Select Install from a list or specific location (Advanced).
4.
Select Search the best driver these locations and check Include this
5.
location in the search.
Click on Browse and specify the path for the driver. Please refer to the
6.
EasyBUILD Version 7.1 build 100 for NIC driver in Driver required section.
Click on Next and follow the instruction to finish the driver update.
7.
20