Vga Driver Installation; Raid Utility Installation; Network Utility Installation; Windows Server 2003 Enterprise X64 Edition Installation (With Integrated Sas Hardware Raid) - Acer Altos R720 Installation & Configuration Manual

Altos R720 Installation Configuration Guide

VGA Driver Installation

Windows will treat onboard VGA as Standard VGA device. You can find
1.
the ATI ES1000 driver in EasyBUILD. Please insert the EasyBUILD into the
optical drive.
Expand Drivers -> Altos R720 -> Graphics adapters -> ATI ES1000, select
2.
Windows Server 2008 and click on Setup.
Follow the instruction to install the VGA driver and reboot the server
3.
after the driver is installed.

RAID Utility Installation

Please insert the EasyBUILD into the optical drive.
1.
Expand Utilities -> Altos R720 -> Integrated SAS hardware RAID 2, select
2.
RAID Web Console 2 (Windows) and click on Setup.
Follow the instruction and use the default setting to complete the RAID
3.
Utility Installation.

Network Utility Installation

The PROSet utility for the onboard Gigabit Ethernet controller will be installed
automatically when you installing the onboard Gigabit Ethernet driver.
Windows Server 2003 Enterprise x64 Edition Installation (with
integrated SAS hardware RAID)
Below information describes how to manually install Windows Server 2003
Enterprise x64 Edition on Altos R720.

Drivers Required

For Windows Server 2003 x64 Installation, the following device drivers are
required.
Device
Integrated SAS
hardware RAID
Onboard Chipset
Onboard Gigabit
Ethernet
Onboard VGA
Onboard USB 2.0
IOAT
Hot-swap
backplane

Software Required

The management utility of integrated SAS hardware RAID and NIC can be
18
Version
1.17.0.64 EasyBUILD 7.1 build 100 (or later)
7.3.0.1011 EasyBUILD 7.1 build 100 (or later)
9.3.39.0 EasyBUILD 7.1 build 100 (or later)
8.24.3 EasyBUILD 7.1 build 100 (or later)
N/A OS built-in
1.2.52.0 EasyBUILD 7.1 build 100 (or later)
5.0.6055.2 EasyBUILD 7.1 build 100 (or later)
EasyBUILD Version